Reliability and safety of miniscrew insertion planning with the use of lateral cephalograms assessed on corresponding cone-beam computer tomography images.

BACKGROUND/OBJECTIVES: Recently, lateral cephalograms have been proposed for guided miniscrew insertion planning. Therefore, the aim was to assess the reliability and safety of such planning on corresponding cone-beam computer tomography (CBCT) images. MATERIALS/METHODS: Intraoral scans, lateral cephalograms, and CBCT images of 52 subjects (even sexes distribution), aged 15.1 ±â€…2.5 years, were included. Miniscrew (n = 104) insertion planning was performed using lateral cephalograms superimposed on the maxillary intraoral scans, while the assessment of their bicortical placement, length in bone, contact with adjacent teeth, incisive canal, and nasal floor perforation was done on corresponding superimposed CBCT images. Moreover, maxillary incisor inclination, crowding, and the maxillary intercanine width were measured. RESULTS: The overall miniscrew length in bone was 7.2 ±â€…1.3mm. Bicortical placement was seen in 58.7% of the sample (38.5% of subjects). Incisive canal and nasal floor perforation was seen in 25% and 21.2% of subjects, respectively. No contact of the miniscrew with adjacent teeth was recorded. A negative significant interaction was seen between the miniscrew length in bone, the percentage of total miniscrew length and maxillary anterior teeth crowding (ß, -0.10, P = .047 and ß, -0.90, P = .006, respectively). Moreover, a positive significant interaction was seen between the incisive canal perforation and maxillary anterior teeth crowding (OR = 1.32, P = .021). LIMITATIONS: Exclusion of subjects with impacted teeth. CONCLUSIONS: Miniscrew insertion planning using lateral cephalograms, despite being safe in preventing contact with adjacent teeth, is limited in achieving bicortical placement and insufficient in completely avoiding incisive canal and nasal floor perforation.

Biomarkers in Body Fluids as Indicators of Skeletal Maturity: A Systematic Review and Meta-analysis.

OBJECTIVES: This review aimed to critically appraise the evidence for biomarkers in blood serum, gingival crevicular fluid (GCF), saliva, and urine in comparison with standard radiographic indices for skeletal maturation assessment. MATERIALS AND METHODS: A thorough literature search in multiple databases was conducted for biomarkers in body fluids for skeletal maturation assessed with cervical vertebrae in lateral cephalograms or on hand-wrist radiographs. Different combinations including free text, MeSH terms, and Boolean operators were used. Two researchers used strict inclusion and exclusion criteria to screen title, abstract, and full text, and used the Quality Assessment of Diagnostic Accuracy Studies (QUADAS)-2 instrument for risk of bias assessment of individual studies. Meta-analysis was performed on eligible studies using RevMan 5 software. RESULTS: A total of 344 articles were screened, of which 33 met the inclusion criteria and quality assessment. The skeletal maturity indicators included insulin-like growth factors (IGF-1), alkaline phosphatase (ALP), bone-specific alkaline phosphatase (BALP), dehydroepiandrosterone sulfate (DHEAS), vitamin D binding protein (DBP), parathormone-related protein (PTHrP), osteocalcin, metalloproteins, and serotransferrin (TF) along with different metabolites. At puberty, a significant rise was seen in IGF-1, DBP, ALP, osteocalcin, TF, and BALP. However, the serum DHEAS and PTHrP increased from pre-pubertal to post-pubertal stages. Due to the data heterogeneity, a meta-analysis could be performed on seven studies in total on IGF-1 in serum and blood. Of these, five were included for data in males and six in females, and four studies on IGF-1 in serum and blood. A significant difference in IGF-1 levels was seen between stages of peak pubertal growth spurt (CS3 and CS4) and decelerating pubertal growth (CS5) compared with growth initiation stage (CS2). CONCLUSIONS: Pubertal growth spurts were correlated with peak serum IGF-1 and BALP in both sexes individually. Peak ALP levels in GCF were correlated with the pubertal spurt in a combined sample of males and females. Standard biofluid collection protocols and homogeneity in sampling and methodology are strongly recommended for future research.

Circumpubertal maxillomandibular growth in untreated subjects with skeletal Class II relationship: A controlled longitudinal study according to the third finger middle phalanx maturation.

INTRODUCTION: Despite the substantial prevalence of skeletal Class II Division 1 malocclusion, only a few studies analyzed the maxillomandibular growth changes in these subjects with contrasting results. This study compared the longitudinal maxillomandibular growth changes in growing subjects with Class I and II skeletal relationships, specifically during the circumpubertal growth phase assessed by the modified third finger middle phalanx maturation (MPM) method. An attempt to uncover any maxillomandibular growth peak in subjects with Class II relationship has been followed. METHODS: From the files of the Burlington Growth Study, a total of 32 subjects (13 males, 19 females) with at least 7 annual lateral cephalograms taken at 9 and 16 years old were included and equally distributed between Class II and Class I groups matched for sex. Overall changes in 12 cephalometric parameters were calculated, and maxillomandibular growth peak was also identified individually and used to register subjects according to the year of growth peak ± 2 years. According to this procedure, annualized changes (trends) were analyzed along with the corresponding prepubertal, pubertal, and postpubertal MPM stages. RESULTS: No significant differences were seen between subjects with Class I and II skeletal relationships at 9 and 16 years, except for the parameters of the sagittal maxillomandibular relationship, such as ANB angle. Overall, changes for all the cephalometric parameters were similar between the groups, except for the CoGn distance increment that was significantly lower in the subjects with a Class II relationship. In both groups, the annual changes in CoA, CoGn, and CoGo distances showed a clear peak at the time point corresponding to a median MPM stage 3. CONCLUSIONS: In subjects with a skeletal Class II relationship, mandibular deficiency appears to be mostly established during the prepubertal growth stage and further aggravated during puberty. However, the maxillomandibular growth trend in subjects with Class II relationship is generally similar to that of subjects with a Class I relationship, including the existence of a pubertal peak.

Influence of the anesthetic modality on the development of neurological injury after lower third molar extraction: A systematic review of the literature.

The aim of this study was to determine if the risk of neurological injury to the inferior alveolar nerve (IAN) and the lingual nerve (LN) following the extraction of lower third molars is affected by the anesthetic modality (local anesthesia (LA) vs. general anesthesia (GA)). A systematic search was performed through the PubMed, Scopus, Cochrane Library, and Web of Science databases; furthermore, a manual search was performed by analyzing the references of full-text articles. From a total of 309 studies (collected after the removal of duplicates), 6 studies were selected. Of these, 4 reported a correlation between GA and nerve damage, while the other 2 did not show an obvious association. The level of bias in the studies was also calculated. Only 2 studies showed a medium risk of bias, while 4 studies showed a high risk of bias; no study showed a low risk of bias. Four of the 6 studies highlighted a higher incidence of IAN and LN injury following the extractions performed under GA. Although no scientific evidence is yet available, due to the scarcity and the limited quality of the studies in the literature, considering the risk­benefit ratio, LA should be the first choice in lower third molar surgery.

In Vitro Qualitative Evaluation of Root-End Preparation Performed by Piezoelectric Instruments.

Although the application of ultrasounds in endodontic surgery allows for effective debridement of the root canal, incorrect device setting or inefficient tips seem to generate cracks during root-end retropreparation. The primary aim of this in vitro study was to establish the presence, or absence, of a correlation between ultrasonic root-end preparation and the formation of cracks. The present study was conducted on human teeth, extracted for periodontal reasons. After root canal treatment, roots were resected 3 mm from the anatomical apex by using a high-speed handpiece and carbide burs. The resected teeth were retroprepared by using an ultrasonic tip (R1D, Piezomed, W&H, Bürmoos, Austria), setting the piezoelectric device at maximum power available for the tip. Time required for the retropreparation was recorded. Before and after retropreparation, all roots were photographed under a stereomicroscope and analyzed by two different operators to evaluate: (a) the presence and extension of dentinal cracks and (b) the morphology of root-end preparation. Finally, piezoelectric tips were analyzed by scanning electron microscopy (SEM) to evaluate morphologic changes after use. A total of 43 single roots (33 with one root canal, 10 with two root canals) were treated. Average preparation time was 1 minute and 54 seconds. None of the roots without initial cracks developed new cracks after retropreparation. Quality of the preparation margins was fairly equal among the prepared specimens. None of the piezoelectric tips broke during instrumentation, and SEM analysis showed minimal surface wear of the tips after performing 11 retropreparations. Within the limits of the present study, the tested piezoelectric system does not seem to represent a major cause for root crack formation. Pre-existing cracks may expand after ultrasound root-end preparation.

Cervical vertebral maturation: Are postpubertal stages attained in all subjects?

INTRODUCTION: The cervical vertebral maturation (CVM) method comprises 6 stages reported to be prepubertal (1 and 2), pubertal (3 and 4) and postpubertal (5 and 6), and its use has been recommended for planning treatment timing in orthodontics. Reliable use of the method implies that pubertal stages have to mature into postpubertal as soon as the growth peak is terminated. The present study was aimed at determining whether postpubertal CVM stages 5 or 6 are attained in all subjects. METHODS: A total of 450 adult subjects (270 females and 180 males; mean age, 30.4 ± 27.3 years; range, 20-45 years) seeking orthodontic treatment and having a lateral head film were included in the study. Customized cephalometric analysis was used, and each recording was converted into an individual CVM code according to the concavities of the C2 to C4 and shapes of C3 and C4. The retrieved CVM codes, either falling within the reported norms (regular cases) or not (exception cases), were also converted into the CVM stages and a newly introduced CVM score (0-9) capable of defining intermediate stage. RESULTS: The most frequent CVM stage was 5, while the CVM stage 6 was attained in only one third of the sample. Up to about 11% of adult subjects showed the pubertal CVM stage 4. Irrespective of the CVM stage or CVM score, no significant differences were seen between the sexes or across ages. The C4 showed a rectangular vertical shape in only 16.4% of the cases. CONCLUSIONS: The percentage of adult population maintaining a pubertal CVM stage 4 is not high, but still relevant from a clinical standpoint. In light of this finding, planning treatment timing-based only on CVM appears not fully reliable.

Reliability of kinesiography vs magnetic resonance in internal derangement of TMJ diagnosis: A systematic review of the literature.

Objective: The aim of this systematic review was to evaluate the accuracy and the diagnostic reliability of kinesiography and magnetic resonance imaging (MRI) in diagnosis of patients presenting temporomandibular disorders. Methods: A literature survey carried out through PubMed, SCOPUS, LILIACS, and the Cochrane Library from the inceptions to the last access on August 18 2016 was performed to locate randomized clinical trials, controlled trials, prospective cohort studies, or retrospective studies (with or without a control group), that examined the diagnostic reliability of recording devices of mandibular movements in comparison to MRI. Results: From the results, it was found that a significant correlation between these electronic devices and MR images could not be detected in case of disc displacement. Discussion: The scientific evidence does not support the usefulness in clinical practice of the jaw-tracking devices to diagnose temporomandibular disorders because their diagnostic reliability is poor.

Factors Influencing the Onset of Intra- and Post- Operative Complications Following Tooth Exodontia: Retrospective Survey on 1701 Patients.

Complications after tooth extraction may occur because of several factors correlated to the patient's medical history, surgical site or type of intervention. The aim of this retrospective cohort study was to evaluate type and frequency of complications after exodontic surgery, its correlation with antibiotic administration and between patient's related systemic factors. From June 2015 until February 2016 1701 exodontic interventions, for a total of 2322 extracted teeth, were carried out at the Unit of Oral Surgery in Trieste. Descriptive statistic, and backward multiple logistic regressions were performed to identify the variables associated with the presence of post-operative alveolitis or any other post-operative complication. The presence of coagulopathy and smoking habit were related to high risk of post-operative alveolitis (OR = 5.51, p = 0.035 and OR = 2.5, p = 0.029, respectively). Tooth fracture was found to be correlated with higher probability of post-operative alveolitis (p = 0.001) and concomitant chemotherapy put at a higher risk post-operative complications, including alveolitis (OR = 29.5, p = 0.018). According to the present results, antibiotic consumption did not seem to reduce the incidence of post-operative infective complications (alveolitis). A careful analysis of medical history, the adequate surgical technique, and the correct instructions in post-surgical behavior, prevent the insurgence of intra and post-operative complications.

Biological Effects of Anodic Oxidation on Titanium Miniscrews: An In Vitro Study on Human Cells.

This controlled in vitro study compared the effects of varying the thickness of a TiO2 layer on cellular activity using commercially available miniscrew samples with identical surface features to derive information with direct clinical impact. Titanium grade V plates with four different thicknesses of TiO2 layer/color were used: absent/gray (Control group), 40-50 nm/pink (Pink group), 130 nm/gold (Gold group) and 140 nm/rosé (Rosé group). In vitro experiments used Saos-2 cells and included cell growth analysis, phospho-Histone H3 and procollagen I staining, cell viability analysis, and a cell migration assay at 12, 24, 40 and to 48 h. Few differences were seen among the groups, with no clear behavior of cellular activity according to the TiO2 thickness. The Control group showed a greater cell count. Phospho-Histone H3 staining was similar among the groups and procollagen I staining was greater in the Rosé group. Cell viability analysis showed a significant difference for live cell counts (greater in the Rosé group) and no difference for the dead cell counts. The cell migration assay showed a delay for the Rosé group up to 40 h, where full repopulation of cell-free areas was obtained at 48 h. The results suggest that the TiO2 layers of the commercial miniscrews have minimal biological effects, including cytotoxicity, with possibly negligible or minimal clinical implications.

The Third Finger Middle Phalanx Maturation (MPM) Method to Assess Timing of Functional Treatment for Skeletal Class II Malocclusion: Report of Three Cases.

A deficient mandibular growth on the sagittal plane is the most frequent diagnostic finding in dentoskeletal Class II malocclusion. Evidence indicated that functional treatment for such malocclusion is efficient only if performed during the pubertal growth spurt, as identified through radiographical growth indicators. With the aim of reducing the radiation to the patients and to follow longitudinally individual growth phases, the use of the sole third finger middle phalanx maturation (MPM), as a 5-stage method, has been proposed. Herein, three clinical cases of skeletal Class II malocclusion in growing patients treated by removable functional appliances (with or without full-fixed appliance treatment) are reported. Timing of intervention was strictly planned according to the MPM method, and skeletal effects have been recorded up to 21 months of follow-up. In all the cases, noteworthy skeletal effects have been achieved in terms of mandibular elongation, with relevant occlusal and aesthetic outcomes. It has also been showed that results are stable or slightly improved after functional treatment. These results would be achieved irrespective of the appliance used and support the use of the MPM method in everyday clinical practice.

Systemic Level of Oxidative Stress during Orthodontic Treatment with Fixed Appliances.

The aim of the study was to assess the level of selected systemic oxidative stress parameters during the first week of orthodontic treatment with fixed appliances. Fifty-four males with malocclusion and having a similar lifestyle were randomized using a computer based procedure and allocated to either the treatment group (TG; n=27;24.6 ± 1.7 years) or control group (CG; n=27;24.7 ± 1.7 years). Capillary blood was collected at baseline and 6 hours, 24 hours, and 7 days after archwire insertion. At the same time points, capillary blood was retrieved in the CG. In order to determine the oxidative stress, both the reactive oxygen species (ROS) formation and the antioxidative defense (AD) potential were measured using the ROS testing and oxygen free radicals defense (equivalent to antioxidant defense) testing, respectively, by a blinded operator. The ratio between ROS and AD (ROS/AD) was calculated and data were analyzed using nonparametric tests. No drop-outs or harms were detected. At baseline, neither ROS (1.54 [1.22; 2.12] and 1.74 [1.40; 2.01] for the TG and CG, respectively), AD (1.19 [0.66; 1.50] and 1.19 [0.57; 1.42] for the TG and CG, respectively), nor ROS/AD levels were significantly different (p>0.05). After 24 hours, the ROS level significantly increased in the TG (2.05 [1.71; 2.26]) and was higher compared to the CG ROS level (1.67 [1.29; 1.95]; p=0.025), while for the AD level, no marked between and within group differences were detected. A notable change of ROS/AD ratio was observed over time only within the TG (p=0.026). Moreover, a significantly higher ROS/AD ratio was detected 24 hours after archwire insertion in the TG compared to the CG (2.69 [1.44; 3.89] and 1.79 [1.45; 2.35], respectively), followed by a decrease. Orthodontic treatment with fixed appliances might induce systemic oxidative stress in the short-term, since ROS levels and ROS/AD levels are normalized within 7 days after archwire insertion.

Blue diode laser versus traditional infrared diode laser and quantic molecular resonance scalpel: clinical and histological findings after excisional biopsy of benign oral lesions (Erratum).

This erratum corrects the spelling of an author's name.

Three-dimensional assessment of back symmetry in subjects with unilateral functional crossbite during the pre-pubertal growth phase: a controlled study.

BACKGROUND/OBJECTIVES: Since a high prevalence of back anomalies has been reported among subjects with crossbite, the aim was to assess the degree of back symmetry among subjects with (crossbite) and without (control) unilateral functional crossbite during the pre-pubertal growth phase. METHODS: A group of 70 subjects (36 boys, 34 girls; 6.8 ± 1.2 years) in the primary or mixed dentition phase were included. Clinical assessment of head posture, shoulder, scapula and hip height were performed with the subject standing, and differences between the left and right side greater than 5 mm recorded. Asymmetry of the scapula and trunk prominence greater than 8 mm was recorded along with the prominence of thoracic and lumbar paravertebral musculature during the forward-bending test. Back symmetry was assessed qualitatively and quantitatively on colour deviation maps of superimposed mirrored three-dimensional back scans at a tolerance level of 2 mm. RESULTS: No significant differences were observed between the groups regarding the frequency of clinically assessed back anomalies. The percentage of back symmetry was slightly lower in the crossbite than that in the control group (71.4 ± 13.3% and 79.2 ± 12.1%, respectively). A significant association (P < 0.05) was seen between scapula plane inclination (OR = 3.41) and scapula prominence inequalities (OR = 3.29) and unilateral functional crossbite, while hip height inequalities (OR = 0.94) were more frequent in the control group. No associations were detected between the side of crossbite and side of prominence of back parameters. LIMITATIONS: The use of different thresholds for clinical (5-8 mm) and three-dimensional (2 mm) symmetry assessment. CONCLUSIONS: Although some degree of back asymmetry was detected in the crossbite group during the pre-pubertal growth phase, this asymmetry does not appear to be clinically relevant.

Immediate Loading of Implant-Supported Single Crowns after Conventional and Ultrasonic Implant Site Preparation: A Multicenter Randomized Controlled Clinical Trial.

AIM: To compare implant survival rate and marginal bone loss (MBL) of immediately loaded single implants inserted by using ultrasonic implant site preparation (UISP) (test) and conventional rotary instrumentation (control). METHODS: Two single implants were inserted for each patient: after randomization, test site was prepared by using an ultrasonic device (Piezosurgery Touch, Mectron, Italy) and control site was prepared by using the drills of the selected implant system (Premium AZT, Sweden & Martina, Italy), until reaching a final diameter of 3 mm in both groups. Identical implants (3.8x11.5 mm) were inserted in all sites at crestal level. Impressions were taken and screwed resin single crowns with platform-switched provisional abutments were delivered with 48 hours. Periapical radiographs were taken at provisional crown insertion (T0), 6 months (T1) and one year (T2) after prosthetic loading to measure MBL. All data were tested for normality and subsequently analyzed by paired samples t-test and forward multiple linear regression. RESULTS: Forty-eight patients were treated in six centers with the insertion of ninety-six implants (48 test; 48 control). Four implants in four patients failed within the first six months of healing (two in test group; two in control group; no difference between groups). Forty patients (age 60.1±10.7 years; 22 female, 18 male) were included in the final analysis. Mean MBL after six months of loading was 1.39±1.03 mm in the test group and 1.42±1.16 mm in the control group (p>0.05) and after one year was 1.92±1.14 mm and 2.14±1.55 mm in test and control, respectively (p>0.05). CONCLUSIONS: No differences in survival rate and MBL were demonstrated between UISP and conventional site preparation with rotary instruments in immediately loaded dental implants: UISP, with its characteristics of enhanced surgical control and safety in proximity of delicate structures, may be used as a reliable alternative to the traditional drilling systems.

A classification for assessing surgical difficulty in the extraction of mandibular impacted third molars: Description and clinical validation.

OBJECTIVE: Surgical time prediction is an important factor to plan both clinical and organizational aspects of mandibular impacted third molar extraction. Many classifications have been proposed over the years, but their accuracy in surgical time prediction remained questionable. The present study introduced a modification of Juodzbalys and Daugela (JD) classification, and had the aim to validate its effectiveness in predicting the duration of the surgery. METHOD AND MATERIALS: Three centers treated patients needing impacted mandibular third molar extraction, following inclusion and exclusion criteria. Extractions were performed following a standardized approach, and surgical time was recorded. A blinded assessor assigned scores to each extracted tooth, according to original and modified JD classifications. Differences among the operators were evaluated though Kruskal-Wallis test, and backward multiple linear regressions were performed to evaluate the variables associated with surgical time, considered as the main outcome of the study. RESULTS: 124 patients were treated with mandibular third molar extraction. Mean surgical time was 24.1 ± 22.2 minutes, with significant differences among the centers (P = .001). Surgical times among groups derived from both former and modified JD classifications were significantly different (P = .002 and P = .001, respectively). In the multivariate analysis, the statistical model including modified JD score was more efficient than the model with former JD score in predicting surgical time (R2 = .204 and R2 = .126, respectively). CONCLUSION: Modified JD classification resulted in a reliable tool for predicting surgical time of impacted mandibular third molar extraction; this could represent an adjunctive tool for clinician and patient in the decision-making process.

Class III Treatment with Skeletal and Dental Anchorage: A Review of Comparative Effects.

OBJECTIVES: This review addresses the comparative effects of skeletal anchored maxillary protraction (MP) versus dental anchored MP. MATERIALS AND METHODS: The studies retrieved had to have both test and control groups treated by the use of a facemask with or without the use of skeletal anchorage though either (palatal/buccal) maxillary or mandibular miniscrews/miniplates, respectively. RESULTS: Nine articles were included. Dentoalveolar changes were seen in all the studies. In particular, a significant proclination of the upper incisors was documented in the group treated with a dental anchorage facial mask, as compared to that treated with skeletal anchorage. Comparing the two methods, almost all the studies indicated a greater maxillary advancement in the group treated with skeletal anchorage. CONCLUSIONS: Therapies with skeletal anchorage produce greater maxillary protraction, reducing undesirable dental effects.

Cephalometric Floating Norms for the ß Angle and MMBP-Wits.

The importance of an accurate measurement of sagittal jaw relationship, that is, skeletal class, is critical to orthodontic treatment planning. The ANB angle, ß angle, and MMBP-Wits are among indices of sagittal jaw relationship. All of these indices are subjected to geometrical distortion, especially from facial divergence, making the use of floating (individualized) norms necessary. This study thus provides floating norms for the ANB angle and for the first time for the ß angle and MMBP-Wits. Lateral head films were obtained from 119 subjects (74 females and 45 males; mean age, 11.2 ± 1.5 years; range, 8.2-14.0 years) with well-balanced and pleasant profile and a near-ideal occlusion. Multiple regression models were employed to quantify the association of the ANB angle, ß angle, and MMBP-Wits each with other four angular cephalometric parameters including SNA, SN/PP, SN/MP, and NSBa angles. The ß angle and MMBP-Wits were associated with the SNA and SN/MP angles; the ANB angle was associated with all the four other cephalometric variables. Floating norms for the ß angle and MMBP-Wits (but not ANB angle) have been cross-tabulated according to the SNA angle (from 74° to 90°) and SN/MP angle (from 24° to 44°). While the ANB angle is subjected to significantly more geometrical distortion as compared to the ß angle and MMBP-Wits, floating norms may be used to individualize the reference values for both the ß angle and MMBP-Wits.

Correlation between Insertion Torque and Implant Stability Quotient in Tapered Implants with Knife-Edge Thread Design.

AIM: To evaluate the correlation between insertion torque (IT) and implant stability quotient (ISQ) in tapered implants with knife-edge threads. METHODS: Seventy-five identical implants (Anyridge, Megagen) were inserted by using a surgical drilling unit with torque control and an integrated resonance frequency analysis module (Implantmed, W&H). IT (N/cm) and ISQ were recorded and implants were divided into three groups (n = 25) according to the IT: low (<30), medium (30 < IT < 50), and high torque (>50). ISQ difference among groups was assessed by Kruskal-Wallis test, followed by Bonferroni-corrected Mann-Whitney U-test for pairwise comparisons. The strength of the association between IT and ISQ was assessed by Spearman Rho correlation coefficient (α = 0.05). RESULTS: At the pairwise comparisons, a significant difference of ISQ values was demonstrated only between low torque and high torque groups. The strength of the association between IT and ISQ value was significant for both the entire sample and the medium torque group, while it was not significant in low and high torque groups. CONCLUSIONS: For the investigated implant, ISQ and IT showed a positive correlation up to values around 50 N/cm: higher torques subject the bone-implant system to unnecessary biological and mechanical stress without additional benefits in terms of implant stability. This trial is registered with NCT03222219.